Discontinued

DVS5.1
Features and
Specifications

 Click picture for large view

Features

Five DVI Inputs, One DVI Output
The DVS5.1 is an active switch that supports all HDTV modes 480p through 1080p, including 720p and 1080i. All computer modes up to 1600x1200 are supported as well. DVI signals are fully buffered, clean up and regenerated on the output.

HDCP Pass-Through (DVI-HDCP only)
The DVS5.1 acts as a pass-through switch for DVI–HDCP encryption. It does not decode / re-encode the HDCP signals. HDCP encrypted data is passed untouched between your source and monitor. This is required for many of today's satellite receiver set-top boxes, as well as newer DVD players.

Note: The DVS5.1 will not pass HDCP signals between two HDMI products, however it works fine when mixing HDMI and DVI devices, or between any two DVI devices.

Toslink and SPDIF Digital Audio
Both Toslink (Optical) and SPDIF (Coax) can be routed through the DVS5.1. Either input will be accepted and both Toslink and SPDIF are available as outputs simultaneously. All conversions between formats are done as needed.

Audio Break Away
An audio break away feature allows switching the digital audio stream independent of the video stream. Listen to CDs while keeping an eye on the score, by selecting the game video on one input, and selecting the DVD player as your audio source.

Features Zektor's Exclusive IIR Learning
The DVS5.1 features Zektor's exclusive IIR (Intelligent Infra-Red) learning. Zektor's IIR learning allows the DVS5.1 to work with virtually any remote control! Control the DVS5.1 with an obsolete TV remote. The DVS5.1 also works great with any universal remote control.

Full Featured Remote Control Interface
A full featured IR command set is available using any remote control, including commands such as: Power Toggle, Bright/Dim/Auto Display Modes, Direct Channel Selection, Channel Up, Channel Down and for better integration with universal remotes with macro capabilities, the discrete commands Power On, and Power Off are also available.

Front Panel Control of Switching
Front panel buttons are available to directly select each input. You are not forced to sequence through all inputs when switching from input two back to input one.

Optional RS-232
For compatibility with Crestron or AMX type setups, an RS-232 module is available for the DVS5.1 The bi–directional RS-232 protocol allows for full control and inquiry of the current DVS5.1 state.

Auto Dimming Display
The LED indicator lights can be set to Bright, Dim, or an Auto Dim mode. The Auto Dim mode will fade the LEDs to half power about 4 seconds after a channel is selected.

Rack Mountable Metal Enclosure (1RU)
Enclosed in a steel chassis with a machined, brushed aluminum front panel, and available in black or silver, the DVS5.1 easily integrates into your existing hometheater environment.

Optional International Power Supply
Available with an international power supply for 90-264VAC, 47-63Hz operation. The international supply comes with adapters for UK, EURO, AUS and USA use.