HDVI5
Features and
Specifications

 Click on pictures for larger views.
 Click HERE for more pictures.

Features

Five DVI Inputs, One DVI Output
The HDVI5 is a fully digital switch, unlike many of the switches that have hit the market recently, the HDVI5 decodes all DVI/HDMI formats and re-encodes them on it's output. Unlike analog switches that simply pass data through, the HDVI5 can correct for a multitude of out of spec signals, correct them, and still output DVI 1.0 / HDMI 1.2a compliant data.

All DVI/HDMI/HDMI-Audio/HDCP Modes Supported
The HDVI5 uses HDMI chipsets with DVI connectors. This allows it to support all DVI Modes, and by using standard DVI to HDMI conversion cables, all HDMI modes. This includes HDMI-Audio and all DVI-HDCP and HDMI-HDCP modes.

All Resolutions Supported
The HDVI5 supports all DVI 1.0, HDMI 1.0, HDMI 1.1, HDMI 1.2 and HDMI 1.2a modes and resolutions. Everything from 480p through 1080p, and computer resolutions from 640x480 through 1920x1200.

Tunable Cable Length Compensation on Inputs
The HDVI5 features independently adjustable equalization on each of its inputs. Easy front panel adjustment allows sparkle free video when using input cable lengths of up to 65ft (20m) in the 1080p mode, and even longer lengths in lower resolution modes. Or by adjusting for short cables noise immunity is increased, for increased picture stability.

Independent Digital Audio Switching
The HDVI5 features an independent digital audio channel. This is needed to route digital audio signals when switching DVI, and allows the convenience of routing audio separately from video when switching HDMI signals. Both Optical (Toslink) and Coax (SPDIF) can be routed through the HDVI5. All inputs accept both Optical and Coax, and both Optical and Coax are available as outputs simultaneously. All conversions between Coax and Optical formats are done automatically.

Note: The HDVI5 does not separate HDMI audio from the HDMI video information.

Audio and Video Break Away
An easy to use, intuitive audio/video breakaway feature allows switching the digital audio stream independent of the video stream. Listen to CDs while keeping an eye on the score. Easily switch the video back and forth between two inputs, leaving the audio unaffected, or switch between audio inputs leaving the video unchanged.

Note: The HDVI5 does not breakout HDMI audio. HDMI audio always follows the HDMI video information.

Adjustable Audio and Video Switching Mute Delays
With a multitude of video monitors and projectors on the market, it's impossible to design a switch that will accommodate them all at their full switching speed potentials. Some monitors require a substantial delay before they respond to the new video signals, others are very fast. Instead of designing for the slowest monitor on the market, we designed the HDVI5 to give you full control over the video and digital audio switch timings. From no delay, to milliseconds, to seconds, pick the timing that matches your monitor. The video and audio switching times are independently adjustable for maximum control.

Easy to Read Front Panel
All video and audio breakaway modes, and relay settings, are easily read from across the room. Ideal during installations, to verify settings without having to cross the room. Nearly all functions can be accessed through the front panel, including learning new IR codes, LED bright and dim levels, cable tuning, audio / video switching delays, etc. Intuitive displays along with an easy to use manual makes customizing the HDVI5 for your particulars needs a breeze.

Features Zektor's Exclusive IIR™ Learning
The HDVI5 comes with it's own remote control. However if more than one HDVI5 is used in one room, the HDVI5 features Zektor's exclusive IIR (Intelligent Infra-Red) learning. Zektor's IIR™ learning allows the HDVI5 to work with virtually any remote control! All discrete codes are supported as well.

Two user defined Auxiliary Relays
Open and close window shades? Raise and lower a projection screen? You decide. The HDVI5 includes two low voltage (30V @ 5A) relays that can be used to control anything you need controlling. The relays can be set to activate whenever a particular input or inputs are selected. Or they can be set to turn on for a user adjustable amount of time before turning off, or simply toggle when a button is pressed, or any combination of the above. With two dedicated front panel and IR buttons, let your imagination decide what to do with this feature.

An Abundance of Control Features
Whatever your control needs are, the HDVI5 can accommodate them. There are numerous ways to control the HDVI5 and include the following:

• Front panel button control.
• Use the included Zektor remote controller.
• Teach the HDVI5 to learn to use a new remote controller (A great solution when two or more HDVI5 share the same room/rack).
• Rear panel hardwired IR jack.
• Rear panel RS-232 using the K.I.S.S.™ protocol.
• Rear panel +12v On/Off control.

Full Featured Remote Control Interface
A full featured IR command set is available using the supplied remote, or any user supplied remote control, including commands such as: Power Toggle, Direct Channel Selection, Audio / Video Breakaway Toggle, and Relay Toggle. For better integration with universal remotes with macro capabilities, the HDVI5 also responds to the discrete commands Power On, Power Off, Direct Audio/Video/Normal breakaway selection, Relay On, and Relay Off.

RS-232 using the K.I.S.S.™ Protocol
The HDVI5 features Zektor's exclusive K.I.S.S.™(Keep It Simple Serial™) protocol. Designed by engineers who have spent their careers having to deal with badly designed serial command sets, the K.I.S.S.™ protocol is one of the easiest, yet most versatile bi-directional protocols on the market.

Firmware Upgradable
Something new on the market, or a feature we haven't thought of yet? No problem, the HDVI5 allows firmware upgrades through its serial port.

Auto Dimming Display
The LED indicator lights can be set to be always Bright, always Dim, or to an Auto Dim mode. The Auto Dim mode will fade the LEDs from bright to dim about 4 seconds after a channel is selected. Full control is given over the bright and dim levels. You can even have the front panel lights dim to fully off, allowing the the HDVI5 to be used in a full range of lighting conditions, from full sunlight to pitch black.

Rack Mountable Metal Enclosure (1RU)
Enclosed in a steel chassis with a machined, brushed aluminum front panel, and available in black or silver, the HDVI5 easily integrates into your existing home theater environment.

Optional International Power Supply
Available with an international power supply for 90-264VAC, 47-63Hz operation. The international supply comes with adapters for UK, EURO, AUS and USA use.

Specifications