Discontinued

MAS3
Features and
Specifications

 Click picture for large view

Features

Three 5.1 Channel Audio Inputs and One Output
All channels are passively switched with no active electronics used to route audio signals.

Passive Switching of Analog Signals
By using relays to route audio signals, as opposed to less expensive analog switching ICs we are able to achieve the same quality of signal pass through, that would be achieved by manually swapping 6 cables each time you switched between SACD and DVD-A players. There's no reason to compromise signal integrity for the convenience of have a remote controlled audio switch.

Gold Plated Connections
Gold plated RCA connectors are used throughout the design to reduce the possibility of contact generated noise caused by corrosion.

Features Zektor's Exclusive IIR Learning
The MAS3 features Zektor's exclusive IIR (Intelligent Infra-Red) learning. Zektor's IIR learning allows the MAS3 to work with virtually any remote control! Control the MAS3 with an obsolete TV remote. The MAS3 also works great with any universal remote control.

Full Featured Remote Control Interface
A full featured IR command set is available using any remote control, including commands such as: Power Toggle, Bright/Dim/Auto Display Modes, Direct Channel Selection, Channel Up, Channel Down and for better integration with universal remotes with macro capabilities, the discrete commands Power On, and Power Off are also available.

Optional RS-232
For compatibility with Crestron or AMX type setups, an RS-232 module is available for the MAS3. The bi–directional RS-232 protocol allows for full control and inquiry of the current MAS3 state.

Auto Dimming Display
The LED indicator lights can be set to Bright, Dim, or an Auto Dim mode. The Auto Dim mode will fade the LEDs to half power about 4 seconds after a channel is selected.

Rack Mountable Metal Enclosure (1RU)
Enclosed in a steel chassis with a machined, brushed aluminum front panel, and available in black or silver, the MAS3 easily integrates into your existing hometheater environment.

Optional International Power Supply
Available with an international power supply for 90-264VAC, 47-63Hz operation. The international supply comes with adapters for UK, EURO, AUS and USA use.

Specifications