Everything but the kitchen sink...

Zektor’s renowned ProAudio™ DSP preamp audio matrices offer more models than any other brand. That’s why the ProAudio™ is the top recommended DSP preamp in the custom channel. More features with unmatched capabilities and ranges.

Designed exclusively by Zektor’s own engineering team here in the USA, the ProAudio™ range are a versatile and cost effective multi-zone audio system.

5 BAND GRAPHIC EQUALIZER ON EACH ZONE

The ProAudio™ series provides maximum sound control including bas, treble and a 5 band graphic equalizer available for each zone. Audio and tone control are adjustable in 0.5dB steps, and all allow direct or relative adjustments (Ex: Set the volume to an absolute -12.5dB, or increase it by 3.0dB). The tone controls have a range of +/-20dB.

ADJUSTABLE GAIN SETTINGS ON EACH INPUT

To balance the different levels of audio coming from different pieces of equipment, each audio input has a full range gain adjustment. The adjustment range is: +24dB to -99.5dB, or full mute, in 0.5dB increments.

SUBWOOFER CONTROL

With low pass and high pass filter settings adjustable from 50Hz to 300Hz, selectable 12db/24db per octave slope with Butterworth or Linkwitz-Riley filters and selectable polarity for each zone, the ProAudio provides easily adaptable subwoofer control.

DOORBELL/PAGING FEATURES

The doorbell connections on the reverse of the system provides the ability to connect doorbell/pager inputs to any output zone and to automatically lower the current volume and push through the doorbell/pager signal. This can also be adapted for fire/evacuation messages.

VOLUME AND TONE CONTROLS WORK ON THE DIGITAL INPUTS AND OUTPUTS.

For the extreme in ultra-quiet audio and lowest possible distortion, by mirroring the analog outputs to the digital outputs, you can input and output digital audio, completely bypassing the analog sections. No extra conversions are required and you still have volume, balance, bass, treble and 5 band equalizer controls.

AUTOMATIC AUDIO CONVERSION

It makes no difference whether your audio comes in through the analog inputs, digital coax inputs or digital optical inputs, all inputs can be converted to analog to provide full flexiblity.

Note: The ProAudio™ does not down convert DTS or 5.1 Dolby audio. When DTS or 5.1 Dolby audio is detected, it is passed straight through from the digital coax input to the digital coax outputs. Analog inputs cannot be directly converted to digital outputs. To convert analog to digital, a digital output can mirror an analog output.

KEEP IT SIMPLE SERIAL™

Available through the TCP/IP port or the RS-232 port, Zektor’s K.I.S.S.™ is one of the easiest to use, serial port protocols, on the market. Yet the extensive bi-directional command set allows total control over the ProAudio.

FRONT PANEL WITH REMOVABLE RACK EARS

How frustrating is it when your product arrives from a manufacturer with no rack ears? Zektor ships all professional products with the rack ears integrated into the product or with removable ears. Unpack and install directly into the rack.

LIP SYNC DELAY

When moving audio around, lip sync can often be an issue. Within each ProAudio system we provide up to 170ms of lip sync delay so that your audio/video matchup doesn’t look like a 1950’s Godzilla movie.

ZONE LOCKING

Lock as many output zones as you wish to create a group of outputs that all automatically switch simultaneously to the same input source.

STEREO TO MONO DOWNMIX FOR EACH ZONE

For hallways, and outdoor speakers, where stereo is not particularly useful, each zone can be mixed from stereo to mono using a variety of different methods.