ProAudio 3264

Everything but the kitchen sink...

The Top Recommended DSP Preamp Audio Matrix For The Custom Installation Channel

Volume, Balance, Bass, Treble and a 5 Band Graphic Equalizer on each zone.

ProAudio 3264

1 votes

ZEK-PROAUDIO3264

Available only through select professional dealers
Call us on (858) 748-8250 or email sales@zektor.com for more information

In many cases the need for an audio receiver can be eliminated by using the audio features of the ProAudio™ Series.

Audio and tone control are adjustable in 0.5dB steps, and all allow direct or relative adjustments (Ex: Set the volume to an absolute -12.5dB, or increase it by 3.0dB). The tone controls have a range of +/-20dB.

LIP SYNC DELAY

We provide up to 170ms of lip sync delay so that your audio/video matchup doesn’t look like a 1950’s Godzilla movie.

DIGITAL AUDIO, OPTICAL AUDIO, ALL AUTOMATICALLY CONVERTED TO ANALOG AUDIO.

It makes no difference whether your audio comes in through the analog inputs, digital coax inputs, or digital optical inputs, all inputs are converted to both analog and digital audio, and analog audio and digital audio are both available on the outputs. Digital is converted to analog. Optical inputs are available for the newer cable boxes that have only optical connections for their digital audio outputs. Note: The ProAudio™ does not down convert DTS or 5.1 Dolby audio. When DTS or 5.1 Dolby audio is detected, it is passed straight through from the S/PDIF input to the S/PDIF outputs. All of our ProAudio™ series product are in process of getting a design refresh to include Dolby 5.1 downmixing.

Note: Analog inputs cannot be directly converted to digital outputs. To convert analog to digital, a digital output can mirror an analog output.

VOLUME AND TONE CONTROLS WORK ON THE DIGITAL INPUTS AND OUTPUTS.

For the extreme in ultra-quiet audio and lowest possible distortion, by mirroring the analog outputs to the digital outputs, you can input and output digital audio, completely bypassing the analog sections. No extra conversions are done, and you still have volume, balance, bass, treble and 5 band equalizer controls available on each zone.

ADJUSTABLE GAIN SETTINGS ON EACH INPUT

To balance the different levels of audio coming from different pieces of equipment, each audio input has a full range gain adjustment. The adjustment range is: +24dB to -99.5dB, or full mute, in 0.5dB increments. You can have separate settings for each input, and a separate setting for analog and digital inputs.

STEREO TO MONO MIX DOWN FOR EACH ZONE

For hallways, and outdoor speakers, where stereo is not particularly useful, each zone can be mixed from stereo to mono using a variety of different methods.

CONTROL DONE RIGHT WITH K.I.S.S.™ (KEEP IT SIMPLE SERIAL™)

Available through the TCP/IP port, or the RS-232 port, Zektor’s K.I.S.S.™ is one of the easiest to use, serial port protocols, on the market. Yet the extensive bi-directional command set allows total control over the ProAudio.

FRONT PANEL WITH REMOVABLE RACK EARS

How frustrating is it when your product arrives from a manufacturer with no rack ears? Zektor ships all professional products with the rack ears integrated into the product or with removable ears. Unpack and install directly into the rack.

32 Stereo L/R Inputs

32 S/PDIF Inputs

16 Optical Inputs

12V Trigger Inputs

48 Stereo Outputs

48 S/PDIF Outputs

Phoenix Connector for front and rear doorbell

System.Collections.Generic.HashSet`1[PulseEight.Store.Backend.Models.ProductSpecification]